Search

Home › Frigidaire › Refrigerators › OP / SH

Frigidaire Refrigerator OP / SH Error Code

Temperature sensor open or shorted. What it means, which models show it, and how to clear it, easiest fix first.

FrigidaireAll Frigidaire refrigerator codes

OP / SH
May need a pro

OP or SH in the freezer or refrigerator temperature display means the control is getting a bad reading from that compartment's temperature sensor (thermistor). OP points to an open circuit, such as a failed sensor or broken wire. SH points to a short circuit. The compartment may then run too warm or too cold.

Compatible models

Frigidaire doesn't publish a model list for this code; it appears on Frigidaire refrigerators with a digital display. Check your owner's manual.

Also shown as

The code shows in whichever temperature display belongs to the faulty sensor, freezer or refrigerator. Frigidaire lists these as service codes on French-door models. Four-door models use a different set of service codes (Er T1 to Er T6) whose individual meanings Frigidaire doesn't publish, so check your manual.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the refrigerator (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire OP / SH

  1. Reset the refrigerator

    Unplug it for 30 seconds and plug it back in, or flip its breaker if you can't reach the plug. Note which display showed the code.

  2. Monitor temperatures

    Put a thermometer in each compartment and check it after a few hours. Keep the doors closed and move perishables to a cooler if the refrigerator rises above 40°F (4°C).

When to call a technician

If the code returns, a technician needs to test the sensor and its wiring at the control board. These checks involve electrical measurements behind interior panels.

Parts linked to OP / SH

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does OP / SH mean on a Frigidaire refrigerator?

OP or SH in the freezer or refrigerator temperature display means the control is getting a bad reading from that compartment's temperature sensor (thermistor). OP points to an open circuit, such as a failed sensor or broken wire. SH points to a short circuit. The compartment may then run too warm or too cold.

Which Frigidaire models show the OP / SH code?

Frigidaire doesn't publish a model list for this code; it appears on Frigidaire refrigerators with a digital display. Check your owner's manual.

Can I fix Frigidaire OP / SH myself?

Only the basic checks. You can safely try the steps above, but OP / SH usually points to a part or fault that needs a technician.

What if OP / SH keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when OP / SH appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Frigidaire refrigerator codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked