Search

Home › Whirlpool › Washers › F0E1

Whirlpool Washer F0E1 Error Code

Items found during Clean Washer cycle. What it means, which models show it, and how to clear it, easiest fix first.

WhirlpoolAll Whirlpool washer codes

F0E1
Easy DIY fix

You started the Clean Washer cycle, but the washer sensed something inside the drum. That cycle is meant to run empty, so it stops until the drum is cleared.

Compatible models

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool washers with a digital display. Check your owner's manual.

Also shown as

Also shown as rL or F34, depending on the display. Front-load models. If the drum is truly empty and the code keeps appearing, repair guides note a worn tub bearing as a possible cause.

Difficulty

Most people can clear this one at home with simple checks.

Safety first: unplug the washer (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool F0E1

  1. Empty the drum

    Open the door and remove all clothing, socks stuck to the drum walls, and any other items. Check the door seal folds as well.

  2. Restart Clean Washer

    Close the door and start the Clean Washer cycle again with the drum completely empty.

  3. Reset the washer's control

    Unplug the washer, or switch off its circuit breaker, and leave it without power for a full 5 minutes. Restore power, choose your cycle again, and press Start. A reset can sometimes clear a one-time glitch in the electronics.

When to call a technician

If the code appears with an empty drum, call a technician to check the drum for drag, since a worn tub bearing can make the washer think a load is present.

Parts linked to F0E1

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does F0E1 mean on a Whirlpool washer?

You started the Clean Washer cycle, but the washer sensed something inside the drum. That cycle is meant to run empty, so it stops until the drum is cleared.

Which Whirlpool models show the F0E1 code?

Whirlpool doesn't publish a model list for this code; it appears on Whirlpool washers with a digital display. Check your owner's manual.

Can I fix Whirlpool F0E1 myself?

Usually, yes. Most F0E1 problems clear with simple checks you can do at home. Start with the first step above: empty the drum.

What if F0E1 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when F0E1 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Whirlpool washer codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked