Home › Refrigerators › Whirlpool › Door Alarm

Whirlpool Refrigerator Door Alarm Error Code

A door or drawer has been left open. Here is what it means and how to clear it, easiest fix first.

Door Alarm
Easy DIY fix

A door or freezer drawer has been open for 2 to 5 minutes, depending on the model, while cooling is on. The alarm repeats every 2 minutes until the door closes. If it sounds with everything shut, something may be holding a door slightly open, or a door switch isn't registering.

The delay before the alarm depends on the model. If you need a door open for cleaning, a tap on any control button quiets the alarm for now, though the Door Ajar symbol remains on. There is no setting to make the alarm quieter.

Safety first: unplug the refrigerator (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Whirlpool Door Alarm

  1. Close every door fully

    Shut all doors and drawers firmly. The alarm resets once they are all closed.

  2. Remove anything in the way

    Push back bins, shelves, or tall packages that keep a door or drawer from sealing. Make sure the door gaskets lie flat.

  3. Check the refrigerator is level

    Use a level on the top of the cabinet, front to back and side to side. Adjust the leveling legs, or shim the floor if needed, so the doors swing shut and seal on their own.

  4. Reset the power

    If the alarm keeps sounding with all doors closed, unplug the refrigerator or switch off its breaker for one minute, then restore power.

When to call a technician

If the alarm still sounds with all doors properly closed and the cabinet level, a technician should check the door switches.

Parts that commonly cause Door Alarm

Order parts by your exact model number so they fit.

Other Whirlpool refrigerator codes

Frequently asked questions

What does Door Alarm mean on a Whirlpool refrigerator?

A door or freezer drawer has been open for 2 to 5 minutes, depending on the model, while cooling is on. The alarm repeats every 2 minutes until the door closes. If it sounds with everything shut, something may be holding a door slightly open, or a door switch isn't registering.

Can I fix Whirlpool Door Alarm myself?

Usually, yes. Most Door Alarm problems clear with simple checks you can do at home. Start with the first step above: close every door fully.

What if Door Alarm keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when Door Alarm appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.