Frigidaire Dishwasher i10 Error Code

Low fill detected on Frigidaire dishwashers.

Frigidaire All Frigidaire dishwasher codes

i10

Easy DIY fix

Not enough water came in during the fill. Frigidaire's manual points to a supply line that's pinched or a shutoff valve that isn't fully open.

Compatible models

Listed in the use and care manuals for the Frigidaire Gallery FGID2479SF and Professional FPID2498SF built-in dishwashers. Other models may use it as well.

Also shown as

No other codes are listed for this fault.

Difficulty

Most people can clear this one at home with simple checks.

How to fix
When to call a pro
Parts
FAQ

Not sure you are reading the code right? See how to read Frigidaire dishwasher codes.

Safety first: unplug the dishwasher (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Frigidaire i10

Open the shutoff all the way
Find the valve feeding the dishwasher, usually under the sink, and turn it fully open. A valve left half-closed after plumbing work is a common cause.
Check the supply line
Switch off the breaker, then pull the toe kick panel and follow the supply line to the inlet valve. Straighten any pinched or crushed section.
Clear it and refill
Restore power, press Cancel and start a new cycle. Listen for water running in within the first minute.

When to call a technician

If the water is on, the line is clear and i10 comes back, a technician should check the water inlet valve and fill sensing.

Parts linked to i10

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

supply line
water inlet valve

Order parts by your full model number so they fit.

Step-by-step guides for this problem

DishwasherDishwasher Not Cleaning Dishes? 9 Causes and Real Fixes
Dirty dishes usually trace back to a clogged filter, spray arm holes plugged with debris, water that isn't hot enough, or loading that blocks the spray.

Frequently asked questions

Which Frigidaire models show the i10 code?

Listed in the use and care manuals for the Frigidaire Gallery FGID2479SF and Professional FPID2498SF built-in dishwashers. Other models may use it as well.

Can I fix Frigidaire i10 myself?

Usually, yes. Most i10 problems clear with simple checks you can do at home. Start with the first step above: open the shutoff all the way.

Other Frigidaire dishwasher codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked