Search

Home › Daikin › Air Conditioners › L5

Daikin Air Conditioner L5 Error Code

Inverter output overcurrent. What it means, which models show it, and how to clear it, easiest fix first.

DaikinAll Daikin air conditioner codes

L5
May need a pro

The inverter saw a sudden surge of current to the compressor. Damaged compressor windings or wiring, a compressor that is mechanically stuck, or an inverter board fault are the usual causes.

Compatible models

Daikin doesn't publish a model list for this code; it appears on Daikin air conditioners with a digital display. Check your owner's manual.

Also shown as

Daikin uses this code across its residential split, SkyAir and VRV ranges, but the exact meaning and causes can vary by series, model year and region, so confirm it in your unit's manual. How to read it: most Daikin ductless wall units only blink the operation lamp. On remotes such as the ARC433 series, press and hold the timer Cancel button for roughly 5 seconds until 00 blinks on the screen, then press Cancel again one step at a time; when the indoor unit answers with a long continuous beep, the code showing is the stored fault. SkyAir and VRV wireless remotes use a different sequence with the Inspection/Test, up/down and MODE buttons, and wired wall controllers usually show the code on their screen.

Difficulty

Try the basic checks, but the usual fix is a technician's job.

Safety first: unplug the air conditioner (or switch off its breaker) before touching filters, hoses or panels. If you smell burning or gas, or see water near the outlet, stop and call a professional.

How to fix Daikin L5

  1. Reset the power at the breaker

    Switch the system off with the remote, then turn off its circuit breaker in your home's main panel. Wait about 5 minutes, switch the breaker back on and restart the unit. If the code repeats quickly after a reset, leave the unit off.

  2. Record the details for the technician

    Write down the exact code, the model numbers from the labels on the indoor and outdoor units, and what the system was doing when the code appeared. Leave the unit switched off if the code keeps returning, so a fault doesn't cause further damage.

When to call a technician

L5 usually means a compressor or inverter board problem. Call an HVAC technician and don't keep restarting the system.

Parts linked to L5

These are the parts most often behind this code. Tap one to see what it does and the signs it is failing.

Order parts by your full model number so they fit.

Frequently asked questions

What does L5 mean on a Daikin air conditioner?

The inverter saw a sudden surge of current to the compressor. Damaged compressor windings or wiring, a compressor that is mechanically stuck, or an inverter board fault are the usual causes.

Which Daikin models show the L5 code?

Daikin doesn't publish a model list for this code; it appears on Daikin air conditioners with a digital display. Check your owner's manual.

Can I fix Daikin L5 myself?

Only the basic checks. You can safely try the steps above, but L5 usually points to a part or fault that needs a technician.

What if L5 keeps coming back?

A code that returns after a reset and the checks above usually means a part is wearing out. Note when L5 appears (which cycle, how often) and have your model number ready; it helps a technician bring the right part on the first visit.

Other Daikin air conditioner codes

Last reviewed 2026-10-19. Codes and steps can vary by model; check your owner's manual.

Sources we checked